KTOG Forum - Holster Selections for the P3AT

Nu_Agin_Shooter

Forum Moderator

The 2nd Amend is
safe...

Posts: 5472
Gender: male

Holster Selections for the P3AT
07/20/07 at 16:02:58

I thought it may be helpful for new owners of the P3AT to see holster options in one thread. If you have a picture of a holster for the P3AT… post it here. Even if you don’t have a picture and you have/had one of the holsters already showing… post comments.…

Links and purchase information may be helpful as well.

My Holsters:

All of them!

Click image to enlarge

====================================================
My favorite for now… the 5.11 Holster that goes with the 5.11 Shirt.

Click image to enlarge

The 5.11 Shirt

Click image to enlarge

I got them both at Midway.
The holster was $9.99 plus s&h. http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=119567
The shirts were $37.99 plus s&h. http://www.midwayusa.com/eproductpage.exe/showproduct?saleitemid=328805
And a video clip of the draw from the 5.11. I made the clip the day I got the shirt and before I got the 5.11 holster. The look and draw are MUCH smoother now!

http://s170.photobucket.com/albums/u250/Nu_Agin_Shooter/?action=view&current =511shirt.flv

XXXXXXXXXX
My second favorite… The GURU DAVE Convertible:

Click image to enlarge

http://www.pocketholsters.com/Kel-Tec_Pocket_Wallet_Holster/kel-tec_pocket_walle t_holster.html $50 plus s&h
I wear this one in my back pocket at times.
The anti print flap can be removed for front pocket carry.

XXXXXXXXXX
The Desanti Nemesis

Click image to enlarge

http://www.desantisholster.com/n38.html $20.50 plus s&h
Good for front pocket carry.
The outside of holster has rubbery texture to help hold holster in pocket during draw.

XXXXXXXXXX
An unbranded (homemade?) Small of Back / Hip Holster.

Click image to enlarge

I got this from a board member for $15 shipped!
I have not used it yet, but I think it will be a nice range holster.

XXXXXXXXXX
And last… for now anyway… A hard plastic Plano case… ( I know...not a holster.)

Click image to enlarge

Model # 1421 from Academy Sports. Less than $5.00
You could put a small pad lock on it, and no... it is not water proof.

Back to top

Patricia Konie > > > > NEVER FORGET

Click image to enlarge

IP Logged

TxCajun YaBB Administrator Texas: Si' Hablo Ing'les Posts: 24551 Gender:	Re: Holster Selections for the P3AT Reply #1 - 07/20/07 at 16:12:37 An oldie but goodie... The anti-print panel snaps on and off. Click image to enlarge K&D Pocket Defender Convertible 2-in-1 http://kdholsters.com/basefile/pdc.html
Back to top	Click image to enlarge P-32 P-32NAA P-3AT P-F9 P-11 P-40 P-357 SUB-9 SUB-2K SU-16C Click image to enlarge IP Logged

Burley Forum Moderator Posts: 4512	Re: Holster Selections for the P3AT Reply #2 - 07/20/07 at 16:46:09 My homemade rig ;compliments of KTOG. http://www.ktog.org/pocketholster.htm Click image to enlarge
Back to top	IP Logged

dawgfvr Junior Member Garands Forever! Posts: 60 Gender:	Re: Holster Selections for the P3AT Reply #3 - 07/20/07 at 17:20:39 I am very partial to this K & D holster...stays in the pocket and pistol presents very fast out of this very small holster. This one was very well thought out. Click image to enlarge Click image to enlarge
Back to top	Change the way you look at things and the things you look at begin to change. IP Logged

mastercrasher Senior Member Oh, to be in a dry place without commies Posts: 366 Gender:	Re: Holster Selections for the P3AT Reply #4 - 07/20/07 at 17:27:26 I usually have my shirt tail out. If it's not in my Bandera belt it's in my 5.11 shirt. Click image to enlarge
Back to top	My firearms have gone underground. IP Logged

nicneufeld

Grand Poobah

"Yah boo, sucks
to you Fritzy!"

Posts: 4696
Gender: male

Re: Holster Selections for the P3AT
Reply #5 - 07/20/07 at 19:31:11

Man, I wish I had a digital camera, because...

I've got two beautiful KD 2in1 convertible holsters, one in black, and one in dark mahogany. Beautiful craftsmanship, THANKS KEVIN!

I feel like I've joined a club or something, with a leather holster now. Now I just need a fancy leather ankle holster (though admittedly my Fobus is working fine for now).

One thing I noted as a dramatic difference between the DeSantis Nemesis and the new holster...getting the gun out with the DeSantis was literally just putting your hand in your pocket and pulling it out, the holster stayed put. Is there a trick with a leather holster? I should probably practice (with an empty gun).

Back to top

"For evil to flourish all that is required is for good men to spout clichés." - Hugh Laurie

IP Logged

BamaShooter

Junior Member

Posts: 74
Gender: male

Re: Holster Selections for the P3AT
Reply #6 - 07/20/07 at 19:37:02

I have an inexpensive holster solution. I prefer front pocket carry, but sometimes carry in my back pocket. This rig works well for both.

I took an Uncle Mike's Size 1 pocket holster, had to rip the seams to allow for the 2nd generation's slightly thicker size. I re-stitched to fit snugly, but loose enough for an easy draw.

Next, I ripped the seam across the top of the paddle, slid a spare magazine in and re-stitched to fit snugly. This way I can carry a spare magazine.

This also holds an added bonus. The spare magazine under the grip forms a nice wallet-like shape when in a pocket. I will continue to carry this cheap holster until I just decide to spend the money for a nice leather or kydex of the same design.

Click image to enlarge

Back to top

« Last Edit: 07/29/07 at 20:20:43 by BamaShooter »

IP Logged

Bobo Grand Poobah Posts: 1657	Re: Holster Selections for the P3AT Reply #7 - 07/20/07 at 20:25:30 SmartCarry used pretty much 24/7 Click image to enlarge Grandfather Oak used occasionally Click image to enlarge
Back to top	As always... just my opinion. Click image to enlarge IP Logged

fmack Junior Member goal/nra/gonh Posts: 44 Gender:	Re: Holster Selections for the P3AT Reply #8 - 07/21/07 at 20:57:03 KNJ holster, front pocket, every day. Click image to enlarge http://www.personaldefensesolutions.net
Back to top	I don't want any trouble. IP Logged

Ole Miss Mike Senior Member Hotty Toddy!!! Posts: 316 Gender:	Re: Holster Selections for the P3AT Reply #9 - 07/21/07 at 21:47:19 I like the WRB front pocket holster. Don't have a pic of mine but it is the middle holster on the website below. The holster stays in the pocket when the gun is drawn. http://www.wrbss.com/pocketholsters.html
Back to top	Colt Gold Cup-----------Kel-Tec PF-9 Colt Diamondback-------Kel-Tec SU-16C Kel-Tec P11------------Remington Nylon 66 Kel-Tec P3AT IP Logged

Sangueffusor Grand Poobah I'm not actually angry. Posts: 1516 Gender:	Re: Holster Selections for the P3AT Reply #10 - 07/23/07 at 12:40:09 Concealment Concepts Pocket Pal: Click image to enlarge http://www.concealmentconceptsholsters.com/pocket_holster.html
Back to top	IP Logged

Mike66 YaBB Newbies Shake me like a British nanny! Posts: 21	Re: Holster Selections for the P3AT Reply #11 - 07/23/07 at 13:32:21 Quote from Bobo on 07/20/07 at 20:25:30: Grandfather Oak used occasionally http://i8.photobucket.com/albums/a34/r_oremland/Self-Defense/07P4150004web.jpg How do you like the G.O.? I have one on order. Does it do a pretty good job hiding it in a pants pocket? Also, does it stay put when you draw?
Back to top	IP Logged

Bobo

Grand Poobah

Posts: 1657

Re: Holster Selections for the P3AT
Reply #12 - 07/23/07 at 15:16:14

Quote from Mike66 on 07/23/07 at 13:32:21:

How do you like the G.O.? I have one on order. Does it do a pretty good job hiding it in a pants pocket? Also, does it stay put when you draw?

Why I like my Grandfather Oak Pocket Companion for my P-3AT with ArmaLaser.
http://www.grandfatheroak.com/Stockdesigns.html
1] Very Light
2] Very Thin
3] Does Not Absorb Sweat
4] Stays In Place In Pocket
5] Gun Snaps In Very Positively, yet ...
6] Draws Easily, and ...
7] Holster Stays In Pocket During Draw
8] Will Probably Never Wear Out
9] Not Expensive
10] Needs No Maintenance

Back to top

As always... just my opinion.

Click image to enlarge

IP Logged

CraigJS YaBB Newbies Death to Tyrants.. Posts: 23 Gender:	Re: Holster Selections for the P3AT Reply #13 - 07/23/07 at 20:31:13 Check out here:http://www.sideguardholsters.com/ I just got one of the "Snap" holsters for my P3AT, it works great holds the gun well etc. In the picture "The Snap" is in the lower right. Be safe.
Back to top	IP Logged

Finch

Junior Member

Still learning, just
a bit slower, that's
all.

Posts: 36

Re: Holster Selections for the P3AT
Reply #14 - 07/23/07 at 22:46:01

I've been experimenting and it looks like I may use several different methods depending on clothes and situation.

1) I bought the Concealment Concepts Pocket Pal based on recommendations here. Today I received my spare mag and am happy to say it does not print (right front pocket) with the spare mag in place. It did print without it though. It's really light and with the spare mag in place the gun seems easier to draw.

2) I also received my Guru pocket holster. Very nicely done. I haven't had time to try it out yet.

3) Had a Belly Bag, but took it back to the store. As someone here pointed out, it's like an advertisement you might have a gun. I always use a regular belly bag and often wonder if people think I'm carrying.

4) Years ago I bought a Smart Carry (or a copy) at a gun show to carry my NAA .22 mag. It only came in black, so i had white nylon cloth sewn over it. I never ended up using it, but fortunately did keep it. I'm sure I will use it at times and probably will get another sized for my Firestorm Mini-9.

5) On GunBroker a guy has a nylon pocket holster similar to the Concealment Concepts but it has a large back to prevent printing. I bought one to try it out, but haven't got it yet.

6) Finally I ordered a clip from Kel-Tec. Haven't received it yet.

I'll post pictures when I have more time.

Has someone done this same type of thread for the PF-9?

rw

Back to top

-RW

IP Logged